Loading...

Pro-Line - Dumont 2.8'' Sand/Snow MTD Raid Blk Whls F/R - PRO1019310

CAD $57.99
Availability: In stock
Only 2 left
SKU:
20661
Distributor Number
PRO1019310
Manufacturer Number
1019310

In The Box

  • (2) Pre-mounted Dumont 2.8" Sand/Snow Tires on Raid Black 6x30 Removable Hex Wheels

  • (2) 6x30 to 12mm Hex Adapters (Narrow)

  • (2) 6x30 to 12mm Hex Adapters (Wide)

  • (12) M3 x 12mm long SHCS hardware

 

Key Features

  • Extreme Paddle Tires for Sand and Snow

  • Pro-Line P-L Logos Embedded into Tire Carcass

  • Incredible Performance and Style!

  • Removable Hexes Allow you to Change Wheel Offsets on the Fly

  • Easily Replace Damaged Hexes or Upgrade to 17mm hexes

Overview

This is a pair of pre-mounted Dumont 2.8" Tires on Raid Black 6x30 Removable 12mm Hex Wheels. Are you ready for the most extreme 2.8" Paddle tires Pro-Line has ever made for 1:10 Monster Truck? Introducing the Dumont 2.8" tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!

The Dumont 2.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:10 Monster Truck today!

Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.

The Dumont 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable 12mm Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO633500 Replacement Hexes) or even upgrading your wheels to 14mm (PRO634700 Sold Separately) or 17mm wheel hexes (PRO633600 Sold Separately) for extreme use! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere!

Please note: All tires & wheels are sold in pairs, unless otherwise noted

PRO1019310 | Dumont 2.8" Sand/Snow Tires Mounted on Raid Black 6x30 Removable 12mm Hex Wheels (2) for Stampede® 2wd & 4wd Front and Rear

Stampede®, Rustler® are registered trademark of Traxxas® L.P.

 

 

 

Features

TIRE FEATURES
  • Extreme Paddle Tires for Sand and Snow
  • Latest Paddle Tire Technology - Large Offset V-shaped Tread
  • Pro-Line P-L Logos Embedded into Tire Carcass
  • Incredible Performance and Style!
  • Made from Very Stiff and Long-lasting Paddle Tire Rubber
  • Foam Inserts Included
  • Made in the USA, since 1982
WHEEL FEATURES
  • Removable Hexes Allow you to Change Wheel Offsets on the Fly
  • Easily Replace Damaged 12mm Hexes or Upgrade to 14mm or 17mm hexes
  • The 2 Most Common 12mm Offsets are Included
  • Fits any of Pro-Line's 6x30 Removable Wheel Hexes
  • Wheel Made from High-strength, Durable DuPont Nylon Material
  • Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
  • M3 Wheel Hex Hardware Included
  • Made in the USA, since 1982

Fits

  • Stampede® 2wd
  • Stampede® 4x4
  • Granite™ (ARA102727, ARA4202V3 and ARA4302V3) with the use of optional 14mm Hex Adapters (sold separately)
  • Other 1:10 Monster Trucks with 12mm Hexes

Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks!

  • 12mm (Plastic narrow & wide PRO633500 or Aluminum narrow PRO633700 & wide PRO633701)
  • 14mm for ARRMA Vehicles (Plastic PRO634700 or Aluminum PRO634600)
  • 17mm (Plastic PRO633600 or Aluminum PRO633800)
More Information
Distributeur numero
PRO1019310
Numéro Manufacturier
1019310
Country
USA
Brand
Pro-Line
Track Surface
Sand, Snow
Wheel Diameter - Inner/outer
2.8"
Hex Size Selection
6x30 Removable
Tire Location Selection
Front & Rear
UPC
675118178974
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top